Zilog Z86C36 Manual do Utilizador descarregar pdf (Página 24)

Z86C36

ICEBOX

UM002202-1001 Setup and Installation

Complete Installation Instructions

The following procedures illustrate a complete step-by-step guide on

installing the ICEBOX.

Set Power Jumper

The Z86C36 ICEBOXes allow the user to power the ICEBOXes and

target from a variety of different sources. Before powering the ICEBOX

the user should select the power configuration.

The procedures below must be followed exactly as described.

Before beginning the procedures study Figure 3, which shows a

schematic of the J1 power jumper. Failure to follow the proce-

dures will result in total damage to the ICEBOX or target.

Choose from one of the following options when selecting the power

source:

•

Jumper pin 1 to pin 2 to power the ICE chip with the ICEBOX’s

adjustable regulator

•

Jumper pin 3 to pin 4 to power target with the ICEBOX’s adjustable

regulator

•

Jumper pin 1 to pin 2 and pin 3 to pin 4 to power both the ICE chip

and target from the ICEBOX’s adjustable regulator

•

Jumper pin 2 to pin 4 to power the ICE chip from the target

When powering the target from the ICEBOX ensure that the

target’s power supply is disconnected.

Caution:

Note:

1 2 ... 19 20 21 22 23 24 25 26 27 28 29 ... 63 64

Sem comentários

Zilog Z86C36 Manual do Utilizador Página 24