Zilog Z80380 Manual do Utilizador descarregar pdf (Página 32)

Compiling and Downloading Introduction

1–20 UM004001-COR1103

DOWNLOADING A COMPILED FILE

Perform the following steps to load the a HEX file.

NOTE: A terminal program (PC host communication software) is required for initialization,

communication, and testing.

The following steps are shown using the Hyper terminal program pro-

vided with Windows.

Open the Terminal

Perform the following steps to open the terminal:

1. Power-up the PC.

2. Launch a terminal program, Hyper Terminal is included with Windows.

3. Open the configuration screen of your terminal program, see Figure 1-11.

FIGURE 1-11. SETTINGS FOR HYPER TERMINAL MONITOR

4. Select the COM port number where the evaluation board is connected.

5. Set the data rate at 9, 600 bps .

6. Set the bits to 8 bits with no parity.

7. Select no flow control.

8. Click OK.

9. Press the reset button on the board. This returns a command prompt and the board is ready

to communicate with host PC.

1 2 ... 27 28 29 30 31 32 33 34 35 36 37 ... 115 116

Sem comentários

Zilog Z80380 Manual do Utilizador Página 32