Zilog Z51F3221 Manual do Utilizador descarregar pdf (Página 15)

UM025801-1112 Z8051 OCD Driver Installation

Z51F3221 Development Kit

User Manual

4. Follow the on-screen instructions to complete the OCD software installation.

Z8051 OCD Driver Installation

The driver programs for the Z8051 On-Chip Debugger are copied during the software and

documentation installation. In the following procedure for PCs running the Windows 7 32-

and 64-bit operating systems, ensure that the target side of the OCD will remain uncon-

nected while you install these drivers.

If you are running Windows Vista, see Appendix B on page 40 to install your device driv-

ers. If you are running Windows XP, see Appendix C on page 43.

1. Connect the OCD hardware to the USB port of your PC by connecting the A (male)

end of one of the two USB A (male)-to-Mini-B cables with the host PC’s USB port.

Connect the Mini-B end to the OCD device.

2. After the PC detects the new hardware, it will display the Installing device driver soft-

ware dialog shown in Figure 5.

3. Select

Browse my computer for driver software (advanced) to display the dialog

shown in Figure 6, which prompts you to key in or browse for the location of the

.inf

file. Depending on the type of computer you use (32- bit or 64-bit), use the

Browse

button to navigate to one of the following paths, then click the

Next button.

– On 32-bit machines, use the following path:

<Z8051 Installation>\Z8051_<version_number>\device drivers\OCD USB\x32

Figure 5. Install Device Driver Dialog, Windows 7

IMPORTANT NOTE: If you should encounter the scenarios presented in Figures 9 or 10, right-click

your mouse on

ZILOG OCD I/F (highlighted in Figure 9) or Unknown device (highlighted in Figure 10)

and select

Update Driver Software...

Note:

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 54 55

Sem comentários

Zilog Z51F3221 Manual do Utilizador Página 15